 |
Input 4 different sets of HDMI signals at the same time and extended through the CAT6 UTP cable. Doing different switch through 8 sets of monitors. The 8 monitors can show or switch the single simultaneous or individual. |
 |
Selected signal source and the signal output position by the push buttons, IR remote control or the RS‐232. |
 |
Built-in infrared receiver to pick up the signal. |
 |
Infrared remote distance farthest can reach two meter. |
 |
Provide the RS232 connect port, through the PCs to control the single source and the single output position. |
 |
The LED display the System connection status. |
 |
Module hardware design supports Plug and Play. |
 |
Used the latest HDMI1.3 specification and compatible down the lower specification. The digital single ascent to 36 bit. Degrade the image more outstanding. |
 |
Supports HDCP. |
 |
Use the most senior display chip of ADI that own the highest compatibility. |
 |
Support the high resolution.
A.The PC single up to the UXGA ( 1600x1200 )@60Hz;
B. the HDMI resolution up to the 1080p ( 1920x1200 ). |
 |
The distance of the input HDMI cable can up to 30 meters. |
 |
The long distance receiver built-in adjustable knob revises the weakness of signal. |
 |
The below shows the resolution of the HE408 supported:
A. The short distance receiver(HR/PHR):720p/1080i@25m;1080p@15m.
B.The long distance receiver(HE100R) :720p/1080i@90m;1080p@70m. |
 |
Made in Taiwan. |
 |
Remark: Suggest using UTP Cat6 cable, use other poor quality cable may lead to signal weaken that unable to achieve the satisfactory performance. |