|
One HDMI signal input and output it to 2 monitors simultaneous. |
|
There is 2 HDMI outputs,one is through the HDMI port connected with the HDMI cable;the other is through RJ-45 port connected with the CAT6 UTP cable,and in the remote end must with the long/short distance receivers. |
|
PC selection via automatic or manual switch. |
|
Module hardware design supports Plug and Play. ,there is no system compatibility issue. |
|
The LED display the System connection status. |
|
Supports the Deep Color ( 10-bit / 12-bit ) and the bandwidth up to 225Hz. |
|
Supports the resolution 480i, 480p, 720p, 1080i, 1080p. |
|
The resolution and the distance:
◎HDMI signal input :
Through the HDMI cable the distance between the HS202 and the HDMI device is 5m.
◎HDMI signal output :
1. Through the HDMI cable the resolution is 1920x1200@ 5m.
2. Through the CAT6 UTP cable ,
→with HDMI-HR / HDMI-PHR short distance receiver : 720p/1080i@ 25m ; 1080p@ 15m.
→ with HDMI-101R long distance receiver : 720p/1080i@ 90m ; 1080p@ 70m. |
|
The long distance receiver built-in adjustable knob revises the weakness of signal. |
|
Comply with HDMI1.3 and DVI 1.0 specification. |
|
Supports HDCP 1.1. |
|
Made in Taiwan. |
|
Remark 1: Auto Switch: Auto-Switch by the connecting PC status,connected PC1 the signal switch to PC1;connected PC2 the signal switch to PC2 and displaying the image on the local and remote monitor |
|
Remark 2: Suggest using UTP Cat6 cable, use other poor quality cable may lead to signal weaken that unable to achieve the satisfactory performance. |