No converter, free choice according to HDMI or VGA signal interface
Mash-up cascade can extend the transmission distance
And can also distribute signals through the receiver directly connected / Lan Switch or fiber converter
Suitable for exhibition hall, MRT, airport, and audio-visual wiring design needs
This solution is through one input source to the multiple remote displays, which can achieve simultaneous display on multiple screens.
Transmitter: Convert high-definition signal into the general network cable, and use the network cable to connect to the TV receiver at a distance of up to 100 meters.
Receiver: the network cable to an HDMI or VGA interface and connect to the TV with a resolution of 1080P.
The signal transmitter has one HDMI local display port.
The receiver of the display can be connected to the TV display and serially connected to the next display, and so on...
It can be used with a Giga switch. The signal transmitter and display receiver all can be connected to the Giga switch.
Support 1080P 60Hz.
VGA extender built-in 3.5mm audio port.
Note: To avoid delay, please don't share it with the internet.
2 x 5V 2A
1 x IR TX Cable
1 x IR RX Cable
1 x User Manual
|Transmitter||1 x HDMI input, 1 x HDMI output, 1 x IR output, 1 x RJ45 output, 1 x RS232|
|Receiver||1 x HDMI output, 1 x IR input, 4 x RJ45 (1 x input, 3 x Cascaded-chainable), 1 x RS232|
|Max Video Resolution||4096x2160 @30Hz / 3840x2160 @30Hz|
|Extension Cable Type & Length||CAT.5e / CAT.6 / Giga switch Max.Length: 100m|
|OS Compatibility||OS Independent|
|Operating Temp||32~ 122°F (0~ 50°C )|
|Humidity||0% ~ 80% RH|
|Power Supply||AC 110V-240V 50/60HZ DC:5V 2A|
|Dimension ( L x W x H )||T: 180 x 82 x 27 mm / R: 180 x 82 x 27 mm (Pairs)|
|Mass (Main unit)||T: 470g / R: 471g (Pairs)|